Home  |   About Us  |   News  |   Testimonials  |   Locations  |   Contact  |   Request a Quote  |   Training  |
 
Back to: All Products > Pumps > Centrifugal Pumps > Sealless Pump Repairs / Mag Drive Pump Repairs
 
Sealless Pumps | Mag-Drive Pumps, Parts & Repairs
 
Sealless Pumps | Magnetically-Driven (Mag Drive) Centrifugal Pumps, Parts & Repair from Sundyne, ANSIMAG, HMD/KONTRO, Nikkiso, Flowserve, & More
 
Safe, Low Cost, & Easy Maintenance!!
Advantages of Sealless Pumps:


  • Environmentally-friendly (Green)
  • Ease of application
  • Low installed cost
  • Low running costs
  • No mechanical seals to replace
  • No flush water necessary
  • Minimal parts inventory
  • Easy maintenance
  • Minimal downtime
  • Maximum on-line time
  • Reduced installation time
  • Safe, leak free operation
 
 
Click Here to Request a Quote or More Information Corrosion Fluid Products Corp. proudly carries a wide variety of industrial, chemical-resistant, centrifugal and positive displacement (PD) pumps and pump parts from the world's best manufacturers. We supply and service pumps in Michigan (MI), Ohio (OH), Illinois (IL), Indiana (IN), Pennsylvania (PA), Iowa (IA), Kentucky (KY), West Virginia (WV), Tennessee (TN) and surrounding states.


Our large local inventory of pumps and pump parts means
quick delivery when you need it most!
 




Ansimag Pumps: KF Series Large ANSI Dimensioned Sealless Mag-Drive Pumps for higher flow and head requirements

Sundyne's Ansimag KF is a plastic-lined, non-metallic, magnetic-driven sealless centrifugal pump.

- Flows to: 1450 GPM (329 m3/hr)
- TDH: 515 Ft. (157m)


The Ansimag KF sealless pump is ideal for most corrosive or acidic applications in the Chemical, Specialty Chemical, and Steel industries.

Click Here to Request a Quote or More Information Materials of Construction: Carbon Fiber Reinforced ETFE (Tefzel)

More Info on Ansimag Pumps: KF Series Large ANSI Sealless Pumps

Download the Ansimag Sealless Mag-Drive Pumps Brochure (PDF)

Exploded View of Ansimag Pump (Requires Adobe Flash)

Availability: MI, IL, OH
 




Ansimag Pumps: K+ Series ANSI Dimensioned Sealless Mag-Drive Pumps for chemical process applications

Sundyne's Ansimag K+ is a plastic-lined, non-metallic, magnetic-driven sealless centrifugal pump.

- Flows up to 675 GPM (153 m3/hr)
- TDH up to 310 ft. (95m)


The Ansimag K+ sealless pump is ideal for most corrosive or acidic applications in the Chemical, Specialty Chemical, and Steel industries.

Click Here to Request a Quote or More Information Materials of Construction: Carbon Fiber Reinforced ETFE (Tefzel), Glass Fiber Reinforced PFA

More Info on Ansimag Pumps: K+ Series ANSI Sealless Pumps

Download the Ansimag Sealless Mag-Drive Pumps Brochure (PDF)

Exploded View of Ansimag Pump (Requires Adobe Flash)

Availability: MI, IL, OH
 




Ansimag Pumps: KM Series "Sub-ANSI" Sealless Mag-Drive Pumps for lower flow requirements

Sundyne's Ansimag KM is a plastic-lined, non-metallic, magnetic-driven sealless centrifugal pump.

- Flows to: 147 GPM (34 m3/hr)
- TDH: 140 Ft. (43m)


The Ansimag KM sealless pump is ideal for most corrosive or acidic applications in the Chemical, Specialty Chemical, and Steel industries.

Click Here to Request a Quote or More Information Materials of Construction: Carbon Fiber Reinforced ETFE (Tefzel), Glass Fiber Reinforced PFA

More Info on Ansimag Pumps: KM Series "Sub-ANSI" Sealless Pumps

Download the Ansimag Sealless Mag-Drive Pumps Brochure (PDF)

Exploded View of Ansimag Pump (Requires Adobe Flash)

Availability: MI, IL, OH
 






Click Here to Request a Quote or More Information
NEW!
Ansimag Pumps: KM1516LF "Low Flow" Sealless Pumps

The Ansimag KMLF sealless mag-drive pump is ideal for Low Flow corrosive or acidic applications in the Chemical, Specialty Chemical, and Steel industries.

- Flows to: 147 GPM (34 m3/hr)
- TDH: 140 Ft. (43m)


    Ideal For:
  • Chemical Injection
  • Chemical Transfer
  • Wet Scrubbing
  • Metal Plating
  • Steel Pickling
    Typical Solutions:
  • Acids
  • Sodium Hydroxide
  • Sodium Hypochlorite
  • Solvent
Designed For Reliability:
-- Rigid ductile iron exterior for metal pump toughness
-- Fully supported, large diameter, shaft for ZERO shaft deflection (even at low flow)
-- Silicon Carbide Bearings for maintenance free operation
-- Oversized thrust rings to handle off duty operation
-- Single, oversized, static O-ring for casing sealing
-- No barbs or retaining rings used to hold parts in place

Built For Performance:
-- Synchronous "mag drive" coupling for zero slip operation
-- Closed Impeller design for maximum hydraulic efficiency and low NPSHr
-- Kevlar® composite containment shell to withstand high operating pressure
-- Patented Sundyne diffuser technology for more controlled operation at low flow

Standard Features and Benefits:
-- Sealless design for ZERO seal leakage
-- ETFE or PFA (non-metallic) lining for universal chemical compatibility
-- Heavy Duty construction with a compact, close coupled footprint
-- Universal Flanges designed to work with ANSI, DIN and JIS flange connections
-- Powder Coated metal surfaces for maximum protection from external elements
-- Made in the USA

Built For Low Cost of Ownership:
Non-Metallic containment shell for maximum sealless pump efficiency
Close Coupled, "Sub-ANSI", configuration ... priced right!
Simple Construction for easy maintenance (only 8 wetted parts)

More Info on Ansimag Pumps: KM1516LF "Low Flow" Sealless Pumps

Download the Ansimag Sealless Mag-Drive Pumps Brochure (PDF)

Exploded View of Ansimag Pump (Requires Adobe Flash)

Availability: MI, IL, OH
 






Click Here to Request a Quote or More Information
Ansimag Pumps: KV Series In-Line, Sealless, Magnet Drive Vertical Pumps

Sundyne's Ansimag KV's sealless design provides safe, leak-proof operation. They are able handle a wide range of heat sensitive corrosives and acids. All wetted parts are ETFE plastic (Tefzel) lined for corrosion resistance and its vertical configuration means a small, space-saving footprint. Fewer internal parts ensures higher reliability and high pumping capacities provide opportunities for a wide range of applications.

- Flows to: 325 GPM (74 m³/hr)
- TDH: 325 Ft. (99m)


With ANSI compliant dimensions the KV is ideal for corrosive/acidic applications in the CPI, Specialty Chemical, and Steel industries.

More Info on Ansimag Pumps: KV Series In-Line, Sealless Vertical Pumps

Download the Ansimag Sealless Mag-Drive Pumps Brochure (PDF)

Availability: MI, IL, OH
 




Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO General Transfer - GTA/GTI Sealless Mag-Drive Pumps

Ideal for general transfer applications within the Chemical, Pharmaceutical and Refining industries.

- Flows to 163 gpm (37 m³/hr)
- Heads to 190 ft (58 m)
- High temperature capability, -40 - 500°F (-40 - 260°C), without any cooling water or seal cooling flushing system

Available in Stainless Steel with Silicon Carbide bearings, Alloy 20 or Alloy C with PTFE gaskets, and ANSI or ISO standard fasteners and flanges.

More Info on HMD/KONTRO Pumps: General Transfer-GTA/GTI Sealless Pumps

Availability: MI
 


Sundyne HMD/KONTRO GSA/GSI Range (Frame 0) Sealless Mag-Drive Pumps

Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO GSA/GSI Range (Frame 0) Sealless Mag-Drive Pumps

A versatile range of general service pumps designed to cover a wide duty and application base using the minimum of pump models by maximizing interchangeability of components. GSA/GSI pumps are for services in the CPI, HPI, and Specialty Processing industries.

- Flows to 1,630 gpm (370 m³/hr)
- Heads to 656 ft (200 m)
- High temperature capability, -40 - 500°F (-40 - 260°C), without any cooling water or seal cooling flushing system


More Info on HMD/KONTRO Pumps: GSA Range Sealless Pumps

Availability: MI
 


Sundyne HMD/KONTRO GSA/GSI Range (Frame 1) Sealless Mag-Drive Pumps

Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO GSA/GSI Range (Frame 1) Sealless Mag-Drive Pumps

The GSA/GSI range is for critical duty services in the CPI, HPI, and Specialty Processing industries. ANSI and ISO magnet drive centrifugal pumps. Flows to 320gpm (73m³/hr), Heads to 295ft (90m).

- Flows to 320 gpm (73 m³/hr)
- Heads to 295 ft (90 m)
- High temperature capability, -40 - 500°F (-40 - 260°C), without any cooling water or seal cooling flushing system


More Info on HMD/KONTRO Pumps: GSA Range Sealless Pumps

Availability: MI
 


Sundyne HMD/KONTRO GSA/GSI Range (Frame 2) Sealless Mag-Drive Pumps

Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO GSA/GSI Range (Frame 2) Sealless Mag-Drive Pumps

The GSA/GSI range is for critical duty services in the CPI, HPI, and Specialty Processing industries. ANSI and ISO magnet drive centrifugal pumps. Flows to 1,806gpm (410m³/hr), Heads to 656ft (200m).

- Flows to 1,806 gpm (410 m³/hr)
- Heads to 656 ft (200 m)
- High temperature capability, -40 - 500°F (-40 - 260°C), without any cooling water or seal cooling flushing system


More Info on HMD/KONTRO Pumps: GSA Range Sealless Pumps

Availability: MI
 




Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO CS Range Chemical Service Sealless Mag-Drive Pumps

A range of magnet drive pumps particularly suited to pumping thermal oils, and other hot mediums using HMD’s torque ring design - solving traditional mechanical seal problems on high temperature applications up to 850°F.

Handling solids up to 1.5% w/w with 100 microns, the CS range is ideal for most chemical applications.

- Flows to 1,760 gpm (400 m³/hr)
- Heads to 490 ft (150 m)
- High temperature capability, -112 - 850°F (-80 - 450°C), without any cooling water or seal cooling flushing system


More Info on HMD/KONTRO Pumps: CS Range Chemical Service Sealless Pumps

Availability: MI
 




Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO GSP API-610/685 Sealless Mag-Drive Pumps

The GSP comprises a range of pumps based on the GS drive, built to API 610 /685 specification, suitable for heavy duty applications in toxic, aggressive, hot, crystallizing, and high value processes.

The pump operates within a temperature range of -40°F to +660°F (-40°C to +350°C) without cooling, and system pressures up to 350 bar.

- Flows to 3,647 gpm (828 m³/hr)
- Heads to 1,146 ft (350 m)
- High temperature capability, -40 - 660°F (-40 - 350°C), without any cooling water or seal cooling flushing system


More Info on HMD/KONTRO Pumps: GSP API-610/685 Sealless Pumps

Availability: MI
 


Sundyne HMD/KONTRO SPGS Self-Priming Mag-Drive Pumps

Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO SPGS Self-Priming Sealless Mag-Drive Pumps

The SPGS is a self-priming magnet drive centrifugal pump. Flows to 264gpm (60m³/hr), Heads to 250ft (76m). This pump is perfect for transfer duty services within the HPI, CPI, and Specialty Process industries.

- Flows to 264 gpm (60 m³/hr)
- Heads to 250 ft (76 m)
- High temperature capability, -40 - 250°F (-40 - 120°C), without any cooling water or seal cooling flushing system


More Info on HMD/KONTRO Pumps: SPGS Self-Priming Sealless Mag-Drive Pumps

Availability: MI
 


Sundyne HMD/KONTRO HPGS High Pressure Mag-Drive Pumps

Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO HPGS High Pressure Sealless Mag-Drive Pumps

The HPGS high pressure magnet drive pump is for high pressure applications. Flows to 1,145gpm (260m³/hr), Heads to 460ft (140m). The pump is widely used in the HPI, CPI, and Specialty Process industries.

- Flows to 1,145 gpm (260 m³/hr)
- Heads to 460 ft (140 m)
- High temperature capability, -150 - 600°F (-100 - 316°C), without any cooling water or seal cooling flushing system


More Info on Sundyne HMD/KONTRO Pumps: HPGS High Pressure Sealless Mag-Drive Pumps

Availability: MI
 


Sundyne HMD/KONTRO ALA / ALI Sealless Mag-Drive Pumps

Click Here to Request a Quote or More Information
Sundyne HMD/KONTRO ALA / ALI Sealless Mag-Drive Pumps

Sundyne's HMD/KONTRO ALA / ALI Sealless Mag-Drive Pumps have flows to 528gpm (120m³/hr), Heads to 230ft (70m).

- Flows to 528 gpm (120 m³/hr)
- Heads to 230 ft (70 m)
- High temperature capability, -22 - 248°F (-30 - 120°C), without any cooling water or seal cooling flushing system


More info on Sundyne HMD/KONTRO Pumps: ALA / ALI Sealless Mag-Drive Pumps

Availability: MI
 




Click Here to Request a Quote or More Information
Nikkiso Non-Seal® Pumps: Sealless Canned Motor Pumps

Nikkiso Canned Motor Pump Models are single stage, sealless, centrifugal pumps available in either horizontal or vertical configurations. The pumped liquid lubricates the single shaft's bearings while efficiently cooling the motor. The canned motor pump's operating principle is significantly enhanced by the fact that no rotating shaft penetrates a pump housing. The result is a design inherently capable of "dual containment", i.e. primary at the stator liner and redundant protection at the outer stator band/terminal lug plate.

More Info on Nikkiso Pumps: Sealless Canned Motor Pumps

Download the PDF Brochure

Availability: MI, IA











The need for global environmental protection requires us to conduct lifecycle assessment and reduce lifecycle costs, which are calculated for the entire product life ranging from initial expenses to running and even disposal costs. Nikkiso non-seal pumps achieve these cost reductions by:
  • reducing unnecessary inspection and maintenance costs by accurate prediction of inspection and maintenance times using the E monitor
  • reducing running costs by lowering power capacity and consumption based on the use of higher efficiency pumps and motors
  • reducing utility costs by using models that don’t require cooling
 


Finish Thompson Sealless Magnetic-Driven Pumps

Finish Thompson Pumps 5 Year Warranty

Click Here to Request a Quote or More Information
Finish Thompson Magnetic Drive (Mag Drive) Pumps Finish Thompson Sealless Magnetic-Driven Pumps

The superior FTI Pump design offers many performance advantages over traditional ceramic magnetically-driven pumps. The unique application of small rare earth magnets, carbon bushings, and spindle design contribute to an unmatched extended run-dry capability. The cantilevered design of the ceramic spindle provides added impact resistance reducing breakage, friction losses, and heat build-up. Rugged polypropylene or PVDF housings provide excellent chemical and corrosion resistance.

More Info on Finish Thompson Sealless Mag-Drive Pumps

Request a Quote or More Information

Availability: MI, IL, IN, IA, WI


Finish Thompson UC Series Magnetic Drive (Mag Drive) Pumps Finish Thompson UC Series ULTRAChem® Magnetic Drive (Mag Drive) Ansi Pumps
ETFE-Lined, Sealless ANSI Dimensional Pumps



Rugged, durable UC Series ansi pumps provide excellent corrosion resistance. Features include heavy duty ductile iron casings lined with pure Tefzel® (ETFE), modified concentric volutes to reduce radial loads, rear sealing ring and balance holes to reduce axial loads and premium silicon carbide components. Magnetic drive UC Series pumps are engineered for long life in the most demanding applications. Atex certified models are available.

Request a Quote or More Information
FTI UC Series ULTRAChem® Sealless Pumps Brochure
FTI UC Series ULTRAChem® Sealless Pump Curves



Finish Thompson DB Series Magnetic Drive (Mag Drive) Pumps Finish Thompson DB Series Magnetic Drive (Mag Drive) Sealless Pumps

FTI's DB Series Magnetic Drive Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications. Premium features include:
  • Highest efficiency - Up to 70% efficiency lowers cost of ownership by significant savings of electricity. Can save thousands of kWh per year on your electric bill.
  • Best run dry ability - Superior run dry ability helps protect the pump from system upset or operator error. Eliminates costly repairs and downtime.
  • Best warranty - Careful attention to detail results in a mag drive pump that is the most reliable and efficient on the market, offering five years of peace of mind.
  • Best corrosion resistance - Durably molded from corrosion resistant polypropylene or PVDF, the DB Series handles the most corrosive chemicals with ease. Prevents downtime due to pump corrosion problems.
  • High working pressure - Allows high specific gravity fluids to be safely pumped. Protects against unexpected surges in system pressure.
  • Multiple connections - NPT or BSP threads, adjustable flanges or union connections make it easy to connect to any system reducing installation cost and time
  • Standard NEMA or IEC motors - DB Series mounts to all standard motors.
  • ATEX certified models available.
Request a Quote or More Information
FTI DB / SP Series Sealless Pumps Brochure
FTI DB Series Sealless Pump Curves



Finish Thompson SP Series Magnetic Drive (Mag Drive) Pumps Finish Thompson SP Series Magnetic Drive (Mag Drive) Sealless Pumps
Sealless, self-priming, plastic, horizontal

FTI's SP Series Magnetic Drive Self-Priming Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. The SP Series combines deep-lift capabilities and lightning-fast priming with the advantages of neodymium magnetic drive technology and corrosion resistant polypropylene and PVDF to handle the most difficult applications with no seal replacement, no leaks and the capability to run-dry without damage.
  • Powerful - The SP's careful engineering resulted in a unique design that allows it to create a powerful, deep vacuum in the suction piping. This allows it to lift fluid from as deep as 25 feet (7.6 m) below the pump. Superior lift and high working pressure capabilities allow SP Series to pump high specific gravity fluids like sulfuric acid, phosphoric acid and sodium and potassium hydroxide with ease.
  • Fast - SP Series is capable of lifting fluids from 18 feet (5.5 m) in less than 90 seconds. Less time waiting, more time pumping.
  • Versatile - The priming ability of the SP Series allows the pumps to handle applications difficult for standard centrifugal pumps. Such applications include pumping fluid from below grade, emptying tanker trucks or rail cars, and transferring fluids from the top of tall bulk storage tanks to reduce the possibility of leaks from sidewall mounted bulkhead fittings.
  • Economical - SP Series are extremely efficient in their use of energy. They offer tremendous savings compared to self-priming AOD (air operated double diaphragm) pumps. SP Series use only a fraction of the energy AOD pumps require.
  • Run dry ability - Run dry ability helps protect the pump from system upset or operator error. Eliminates costly repairs and downtime.
  • Best warranty - Careful attention to detail results in a mag drive pump that is the most reliable and efficient on the market, offering five years of peace of mind.
  • Best corrosion resistance - Durably molded from corrosion resistant polypropylene or PVDF, the SP Series handles the most corrosive chemicals with ease. Prevents downtime due to pump corrosion problems.
  • Multiple connections - NPT or BSP threads, adjustable flanges or union connections make it easy to connect to any system reducing installation cost and time
  • Standard NEMA or IEC motors - SP Series mounts to all standard motors.
Request a Quote or More Information
FTI SP Series Sealless Pumps Brochure
FTI SP Series Sealless Pump Curves



Finish Thompson KC Series Magnetic Drive (Mag Drive) Pumps Finish Thompson KC Series Magnetic Drive (Mag Drive) Sealless Pumps
Sealless, plastic, horizontal

Next generation mag drive pumps, the DB Series, are now available. View the DB Series pumps by clicking here.

Finish Thompson continues to provide product, parts and support for KC Series pumps.

Request a Quote or More Information
FTI KC Series Sealless Pumps Brochure
FTI KC Series Sealless Pump Curves



Finish Thompson MSKC Series Magnetic Drive (Mag Drive) Pumps Finish Thompson MSKC Series Magnetic Drive (Mag Drive) Sealless Pumps
Multi-stage, sealless, plastic, horizontal

Manufactured from corrosion resistant polypropylene or PVDF, MSKC Series horizontal centrifugal pumps are designed to provide years of reliable service. MSKC Series pumps feature state of the art magnetic coupling technology that results in a leak-proof design. Multiple impellers allow for a small footprint with smaller motors. These pumps offer excellent corrosion resistance and are available in a various impeller combinations. MSKC Series pumps feature outstanding run dry ability when equipped with a carbon bushing.

Request a Quote or More Information
FTI MSKC Series Sealless Pumps Flyer
FTI MSKC Series Sealless Pump Curves



Finish Thompson VKC Series Magnetic Drive (Mag Drive) Pumps Finish Thompson VKC Series Magnetic Drive (Mag Drive) Vertical Sealless Pumps
Vertical, sealless, plastic

Vertical, magnetic drive centrifugal pumps (VKC) in polypropylene or PVDF materials are designed to provide years of reliable service. VKC Series pumps feature state of the art magnetic coupling technology, which allows for a completely sealed column that prevents aeration, micro-bubbles and the release of fugitive emissions. These pumps offer excellent corrosion resistance and are available in a wide range of sizes.

Request a Quote or More Information
FTI VKC Series Sealless Pumps Brochure
FTI VKC Series Sealless Pump Curves



Finish Thompson MSKVC Series Magnetic Drive (Mag Drive) Pumps Finish Thompson MSVKC Series Magnetic Drive (Mag Drive) Vertical Sealless Pumps
Multi-stage, vertical, plastic

Manufactured from corrosion resistant polypropylene or PVDF, MSVKC Series vertical centrifugal pumps are designed to provide years of reliable service. MSVKC Series pumps feature state of the art magnetic coupling technology that allows for a completely sealed column, which prevents aeration, micro-bubbles and the release of fugitive emissions.

Multiple impellers enable a small footprint with smaller motors. These pumps offer excellent corrosion resistance and are available in a various impeller combinations.

Request a Quote or More Information
FTI MSVKC Series Sealless Pump Curves



Finish Thompson AK Series Magnetic Drive (Mag Drive) Pumps Finish Thompson AK Series Magnetic Drive (Mag Drive) Vertical Sealless Pumps
Stainless steel, cantilevered vertical, sealless

Manufactured from rugged, corrosion resistant 316 stainless steel, AK Series vertical centrifugal pumps are designed to provide years of reliable service. AK models feature 12” (30 cm) long cantilevered designs.

Request a Quote or More Information
FTI AK Series Sealless Pumps Brochure
FTI AK Series Sealless Pump Curves



Finish Thompson AV Series Magnetic Drive (Mag Drive) Pumps Finish Thompson AV Series Magnetic Drive (Mag Drive) Vertical Sealless Pumps
Stainless steel, sealless, vertical

Manufactured from rugged, corrosion resistant 316 stainless steel, AV Series vertical centrifugal pumps are designed to provide years of reliable service. A wide variety of port sizes, impeller diameters and column lengths make AV Series pumps extremely versatile.

Request a Quote or More Information
FTI AV Series Sealless Pumps Brochure
FTI AV Series Sealless Pump Curves

 






Click Here to Request a Quote or More Information
Flowserve Durco Polychem M-Series Non-Metallic Sealless Pumps

The Flowserve PolyChem M-Series ASME pumps are non-metallic magnetic drive pumps designed to meet ASME B73.1 dimensional standards. The M-Series is designed with PFA-lined wet ends for superior corrosion resistance and high temperature performance

Applications: Water Treatment, Pharmaceuticals, Plating, Galvanizing and Other Coatings, Polymers, Renewable Fuel Production, Shipping, Solvents, Volatile Organic Compounds, Agriculture, Waste Processing, Automotive, Auxiliary (chemical), Caustic and Chlor-alkali, Construction, Desalination, Electronics, Food Processing, OEM, Acid Transfer

Industries: Chemical Processing, Water Resources, Primary Metals, General Industries

Standards: ASME (ANSI), ISO

Misc: • PFA Lined Wet End is globally preferred for its superior corrosion resistance and temperature allowance.
• Rugged Metal Armor meets material specifications of GGG40.3.
• Separate Inner Magnet and Impeller Components significantly reduce impeller replacement cost compared to integral inner magnet/impeller designs.
• Rotating Shaft Design eliminates need for shaft support obstructions in the casing inlet.
• Rugged Silicon Carbide Bearings offer superior wear resistance and chemical inertness.


Operating Parameters • Flows to 135 m3/h (600 gpm)
• Heads to 145 m (480 ft)
• Pressures to 17 bar (250 psi)
• Temperatures from -30°C (-20°F) to 150°C (300°F)

More Info on Flowserve Pumps Durco M-Series Sealless Mag-Drive Pumps

Availability: MI, IL, OH, PA

CFPC is a Top 5 Authorized Flowserve Pumps Distributor

 




Click Here to Request a Quote or More Information
Flowserve Durco Guardian® MD Sealless Magnetic-Driven Pumps

Flowserve metallic magnetic drive pumps are used wherever process leakage cannot be tolerated. Durco Guardian pumps conform to the ASME B73.1M (ANSI) dimensional standard. Durco MD pumps conform to ISO 2858 dimensional standards. Guardian and MD process pumps utilize the same impellers and casings as the conventionally sealed Mark 3 and process pumps. The Silicon Carbide Bearings offer unmatched corrosion and abrasion resistance, and unique, high temperature bushing cartridges with tolerance rings to compensate for thermal expansion.

More Info on Flowserve Durco Guardian® MD Sealless Magnetic Drive Pumps

Availability: MI, IL, OH, PA

CFPC is a Top 5 Authorized Flowserve Pumps Distributor

 
 
All Pumps > Centrifugal Pumps:
ANSI Pumps | Sealless Pumps | Split Case Pumps | Vertical & In-Line Pumps | Self-Priming Pumps | High Pressure Pumps | Trash/Solids Handling Pumps | Slurry Pumps | Submersible Pumps | End Suction Pumps | Sanitary Centrifugal Pumps

Positive Displacement Pumps:
Gear Pumps | Diaphragm Pumps | Metering Pumps | Plunger Pumps | Peristaltic Pumps | Sanitary Positive Displacement (PD) Pumps

Pump Repair Services