| ENECON Coatings for Pump, Equipment & Concrete Repair, Resurfacing, and Corrosion/Erosion/Abrasion Protection
Coatings- Advanced Polymer Coating Technologies from ENECON
ENECON Coatings Overview Video
Download:
MP4 |
WMV | Full Version WMV
(Video may take a moment to load, depending on your connection)
ENECON Coatings Minimize the Effects of Erosion, Corrosion, Cavitation, Wear and Chemical Attack Problems on:
pipes • pumps • impellers • valves • tanks • condensers • heat exchangers • tube sheets • water boxes • chillers • absorbers • shafts • hydraulic rams • FGD systems • scrubbers • centrifuges • cooling towers • containment dikes • troughs • spillways • propellers • kort nozzles • bow thrusters • rudders • struts • hull fairing & more
Browse our ENECON Coatings Inventory by Application:
Corrosion Fluid Products Corp. proudly carries ENECON'S entire line of revolutionary coating products for pump and equipment repair, resurfacing, and protection. A recognized world leader in developing advanced polymer coating technologies, the ENECON organization has pioneered unique coating systems for industry, including the U.S. Navy, the petrochemical industry and electrical utilities. These extraordinary polymer systems are the result of years of research and development work that began with the first epoxy non-skid deck coatings approved by the U.S. Navy and the first products approved to the Department of Defense Specification C-24176 for hull fairing / smoothing.
Pittsburgh Zoo & PPG Aquarium ENECON Coatings Testimonial
(Video may take longer to load, depending on your connection)
Pumps, Pipe & Equipment Repair Coatings
|
ENECON METALCLAD
Wherever erosion, corrosion, wear or chemical attack create problems in fluid flow systems, polymer composites provide the ultimate solution. ENECON researchers have combined the latest and safest polymer technology with unrivaled fluid flow systems engineering knowhow to produce the most advanced polymer systems available for rebuilding, resurfacing and protecting virtually all fluid flow components.
METALCLAD systems exhibit outstanding compressive and flexural strengths as well as phenomenal adhesion. Their ability to cure at low temperatures, their superb chemical resistance and
their non-shrink properties make them the obvious choice for the maintenance engineering professional.
METALCLAD repair and protection systems offer incredible savings over conventional repair or replacement procedures.
Download the ENECON Coatings PDF Brochure
Material Safety Data Sheets (MSDS) are Available, Contact Us for More Info
|
METALCLAD CeramAlloy CL+AC (Advanced Composite) Coatings from ENECON
For repairing, resurfacing and protecting pumps, piping, and all types of fluid flow components from aggressive erosion and corrosion damage. Excellent erosion/corrosion resistance.
METALCLAD CeramAlloy CP+AC (Advanced Composite) Coatings from ENECON
Engineered to repair deeply damaged / eroded fluid flow components. Repair & rebuild all types of equipment back to original contour! Cures to metal-hard, ceramic-like finish.
METALCLAD CeramAlloy CBX (Advanced Composite) Coatings from ENECON
Engineered to repair deeply damaged components. Repair & protect pumps, piping, and all types of equipment subject to very aggressive abrasion.
METALCLAD CeramAlloy CL+ Coatings from ENECON NUCLEAR D.B.A. Tested ASTM 3911-89
For repairing, resurfacing and protecting all types of fluid flow components from aggressive erosion and corrosion damage. Erosion/Corrosion resistant.
METALCLAD CeramAlloy CP+ Coatings from ENECON NUCLEAR D.B.A. Tested ASTM 3911-89
For repairs to areas deeply damaged by erosion/corrosion environments on pumps, piping and all types of fluid flow components.
METALCLAD SpeedAlloy Coatings from ENECON
For FAST Pipe Leak Repairs and MORE! The first choice for fast, reliable mechanical repairs. Available in unique, convenient ENECON 'A-Packs'.
METALCLAD SpeedAlloy QS Coatings from ENECON
The SUPER FAST Leak Stopper! Seals leaks in minutes without heat. unlimited shelf life. 100% solids, safe & simple to use.
METALCLAD DurAlloy Coatings from ENECON
Repairs to pumps, pipe and all types of machinery and equipment: Trowelable / machinable - a permanent bond to virtually any rigid surface: metal, plastic, glass, ceramics, wood, concrete & more!
Concrete Repair Coatings
ENECRETE DuraQuartz Coatings from ENECON
The finest concrete repair and protection system available. Superior strength, durability and adhesion. Bonds to any rigid surface. Outstanding abrasion / impact resistance. Excellent chemical resistance.
ENECRETE WP (Water Plugger) Coatings from ENECON
The jobsite water/fluid leak plugger that stops running water in under 60 seconds! Repair and waterproofing for masonry structures in hydrostatic pressure applications.
ENECRETE WS (Water Sealer) Coatings from ENECON
The water sealer for porous masonry walls. The jobsite waterproofer and leak sealer that coats, fills, seals & protects porous masonry walls in hydrostatic pressure, below-grade applications.
ENECRETE DuraFill Flooring System Coatings from ENECON
The finest broadcast flooring system available. Also ideal for bulk-fill applications. Extraordinary adhesion to virtually any type of mineral substrate as well as most metals.
Cavitation Repair Coatings
|
ENECON FLEXICLAD
Extraordinary, super resilient polymer systems specifically developed for cavitation problems.
Whether it's pump impellers or ship propellers, cavitation damage to metal is a never ending problem — and one that presented very few repair options
to the maintenance engineer in the past. But now, systems from ENECON provide exceptional protection to equipment prone to cavitation attack and subsequent damage. Super tough, super
resilient and cost effective, ENEOCON FLEXICLAD Coatings.
FLEXICLAD® DuraTough™ systems provide the sensible alternative to some of the most severe erosion / corrosion problems in industry today.
FLEXICLAD® DuraTough™ systems are also ideal for creating or repairing flexible seals on machinery and equipment such as on heat exchangers, pumps, valves, pipe and piping
systems.
Download the ENECON Coatings PDF Brochure
Material Safety Data Sheets (MSDS) are Available, Contact Us for More Info |
FLEXICLAD DuraTough DL Coatings from ENECON
For resurfacing, coating & protecting pumps, pipe & other fluid flow components subject to cavitation damage. Superior strength, durability and adhesion with flexibility, abrasion resistance and elongation.
FLEXICLAD DuraTough DP Coatings from ENECON
Ideal for rebuilding/repairing cavitaition-affected areas as well as creating or rebuilding flexible seals, gaskets, seats, etc, on machinery and equipment such as heat exchangers, pumps, valves and piping systems. Superior strength, durability and adhesion with flexibility, abrasion resistance and elongation. 100% solids, trowelable.
Chemical Protection Coatings
|
ENECON CHEMCLAD
The ultimate in chemical protection coating systems
ENECON's CHEMCLAD high performance polymer coatings have been specifically designed to protect pumps and other machinery, equipment and plant structures from aggressive chemical attack.
Resistant to a very wide variety of organic and inorganic acids, alcohols, alkalis, esters, ethers, hydrocarbons, halogenated hydrocarbons, ketones, oils, salts, etc., systems from
ENECON are the finest chemical-resistant coatings available. They are revolutionary polymer composites that can be easily and safely applied by brush, roller, squeegee or airless spray - even
in confined spaces.
For metal chemical protection on pipes, tanks, pumps, valves, fume hoods, drains, heat exchangers, etc.
For concrete chemical protection on containment dikes, troughs, spillways, process areas, etc.
Download the ENECON Coatings PDF Brochure
Material Safety Data Sheets (MSDS) are Available, Contact Us for More Info |
CHEMCLAD SC Coatings from ENECON
Protects surfaces from chemical attack. Concrete, metal, wood, rigid plastics, etc. For most standard industrial environments where mild acids, alkalis, bleach, oils, gasoline, etc. are present.
CHEMCLAD XC Coatings from ENECON
Extraordinary protection in some of the most aggressive chemical environments. It is the finest room temperature cured, chemical protection coating system on the market. CHEMCLAD® XC is resistant to a very broad range of organic and inorganic acids, alkalis, solvents, salts, hydrocarbons, etc. It is easily applied by brush or roller and can be used to protect all types of metal and cementitious surfaces. For your toughest chemical attack problems, use CHEMCLAD XC.
Pipe Wrap Systems
|
ENECON DURAWRAP
Repair, reclaim, reinforce & extend the life of all types of metal & concrete pipes & tanks
DuraWrap™ polymer/carbon fiber reinforced composite makes repairing and rebuilding aging, often severely deteriorated piping, tanks and other fluid flow equipment possible.
The ENECON DuraWrap™ composite, a unique marriage of ENECON 's high performance polymers and cutting-edge, space-age carbon fiber technology, was specifically created to repair, rebuild, reinforce and even restore the integrity of such fluid flow systems - thereby greatly extending their service life and eliminating the need for expensive replacement.
DuraWrap™ can be applied to the interior and/or exterior of piping and equipment to both seal and strengthen these components. When applied to the interior walls of underground or otherwise inaccessible piping, DuraWrap™ can effectively repair and restore piping integrity
without expensive excavation and replacement.
The outstanding performance of the ENECON DuraWrap™ system allows today's maintenance professional to extend the service life of yesterday's equipment and structures.
Download the ENECON DuraWrap Pipe Wrap Systems PDF Brochure
DuraWrap Carbon Fiber Pipe Wrap System Saves Tennessee Municipality Thousands of Dollars (PDF)
ENECON DuraWrap Saves Main Influent Pipe at Waste Water Treatment Plant (PDF)
Download the ENECON Coatings PDF Brochure
Material Safety Data Sheets (MSDS) are Available, Contact Us for More Info |
Floors and Structure Coatings
ENECLAD FPS (Floor Protection System) 2000 Coatings from ENECON
Easy to apply ENECLAD FPS 2000 seals and protects concrete floors. This extraordinary high-performance polymer composite is extremely abrasion resistant, making it ideal for heavy traffic areas in warehouses, hangars, loading docks, etc. FPS 2000 jackets the surface in a rugged, armored coating that resists forklift traffic, oil, gasoline and many common industrial chemicals.
FPS 2000 produces a seamless surface that is easy to clean and easy to maintain.
ENECLAD SuperBond Coatings from ENECON
ENECLAD® SuperBond is a revolutionary structural adhesive that provides unrivaled performance when bonding a new concrete overlay to an existing, cured concrete surface or when bonding synthetic/plastic mortars to virtually any rigid surface. When used to bond new concrete to old, the strength of the resultant bond is many times greater than that of monolithic concrete!
As a universal bonding agent, SuperBond is ideal as a bond coat for many types of conventional paint systems or for surfaces that are traditionally difficult to coat — galvanizing, glazed ceramic tile, glass, stainless steel, and aluminum.
SuperBond can even be used as a bonding agent for permanent immersion applications such as in swimming pools or on ships' hulls. It cures chemically, transforming the bond-line into a highly durable, waterproof film.
ENECLAD SPS (Self Priming Screed) Coatings from ENECON
ENECLAD SPS is a three-component, 100% solids, concrete primer/sealer that is specifically formulated to also smooth-out rough concrete surfaces in order to improve the appearance of ENECON top-coats such as ENECLAD FPS 2000 or CHEMCLAD chemical protection coatings. It is easy to apply using a trowel or squeegee. ENECLAD SPS is virtually odor free and has no V.O.C.’s.
ENECLAD® SPS exhibits excellent adhesion to any type of concrete substrate. It also has great impact and abrasion resistance.
ENECLAD CFS (Clear Floor Sealer/Sealant) Coatings from ENECON
Seal & dustproof concrete without any odor. ENECLAD® CFS is a two-component, 100% solids, clear concrete sealer that is virtually odor-free and has no V.O.C.’s. It has been specifically formulated to provide outstanding sealing and dust-proofing for all types of cement and mineral substrates. The coating penetrates and seals porous concrete providing a hard wearing, non-dusting, easy-to-clean surface.
ENECLAD CFS exhibits excellent abrasion and impact resistance. It holds up to most industrial cleaners, lubricants and common maintenance chemicals. It will seal and bond to: Concrete, Terrazzo, Marble, Slate, Stone, Quarry Tiles, Brick, Pavers, Metal, Wood & more.
Advanced Roof Repair Coatings
|
ENECON ENESEAL HR (HEAT REFRACTIVE)
Repair roof problem areas, waterproof, reduce solar heat & protect insulation!
ENECON ENESEAL HR advanced polymer coatings provide excellent encapsulation, protecting roofs and all types of structures and materials from oils, water damage and physical injury.
A durable, seamless, micro-porous, moisture resistant, flexible, ‘skin’. Also provides a heat refractive, energy saving, ‘cool roof’ surface.
ENESEAL HR is a single component,
water based, liquid ceramic-filled membrane which cures to a durable, seamless, flexible ‘skin’ that refracts and reflects heat while providing a moisture resistant barrier to virtually any type of surface... i.e., all types of insulation, plastics, concrete, brick, block, slate, tiles, wood, metal, bitumen, glass, tar / asphalts, etc.
ENESEAL HR is easily applied by brush, roller or spray. Because it's water based, cleanup is quick and easy with soap and water. Completely non-toxic and nonflammable.
Download ENECON ENESEAL HR (Heat Refractive) Coatings Brochure
Largest Indoor Soccer Facility in North America Selects ENESEAL HR to Repair & Protect Roof
Download the ENECON Coatings PDF Brochure
Material Safety Data Sheets (MSDS) are Available, Contact Us for More Info |
Environmental Corrosion & Steel Protection Coatings
|
ENECON ENESEAL CR (Corrosion-Resistant)
Corrosion-resistant, UV-resistant, flexible, water based, surface tolerant coatings
ENESEAL CR is a single component, water based, liquid coating which dries to a highly durable, corrosion resistant, elastomeric ‘skin’ that provides extraordinary environmental protection to all types of metal, steelwork, and concrete / masonry surfaces. It can also be applied as a top coat over most zinc primers. It exhibits excellent adhesion to all types of ferrous metal as well as galvanized surfaces. Mechanical wire brushing, grinding or high pressure water blasting is typically acceptable to achieve good adhesion.
ENESEAL CR incorporates a unique blend of corrosion inhibitors, UV resistant resins and pigments, erosion resistant inorganic fillers and elastomeric acrylic polymers in order to provide outstanding performance in all types of demanding industrial and marine environments. Easily applied by brush, roller or spray, ENESEAL® CR cleans up quickly and easily with just soap and water.
Download ENECON ENESEAL CR (Corrosion Resistant) Coatings Brochure
Download the ENECON Coatings PDF Brochure
Material Safety Data Sheets (MSDS) are Available, Contact Us for More Info |
Masonry Penetrant / Weather Barrier Coatings
|
ENESEAL MP (Masonry Penetrant)
Water-Based Penetrant / Weather Barrier for Masonry, Concrete, Brick & Stone
UV resistant • Water-repellant • Environmentally safe • Invisible when dry
ENESEAL® MP is a single component, water-based, ultra-low viscosity weather barrier which dries to a completely invisible, water repellant masonry sealer. It provides extraordinary weather protection to virtually all types of concrete, masonry and mineral surfaces.
ENESEAL® MP forms a hydrophobic barrier inside masonry pores that repels water and water-borne salts. This significantly reduces the damaging effects of moisture penetration into concrete and masonry, such as surface scaling, freeze-thaw cracking and corrosion of reinforcing steel.
The invisible barrier forms below masonry surfaces to depths of up to 3/4 inch and, therefore, will not wear away as a result of surface traffic and/or harsh weather conditions. This barrier is also breathable – allowing water vapor to escape from inside the concrete or masonry while dramatically reducing liquid water penetration into the substrate.
Download ENECON ENESEAL MP (Masonry Penetrant) Coatings Brochure
Download the ENECON Coatings PDF Brochure
Material Safety Data Sheets (MSDS) are Available, Contact Us for More Info |
10 Stocking Branches to Serve You
| Farmington Hills, MI |
248.478.0100 |
|
Pittsburgh, PA |
724.857.3900 |
| Midland, MI |
989.496.2600 |
|
Davenport, IA |
563.391.2700 |
| Kentwood, MI |
616.554.9100 |
|
North Canton, OH |
330.497.2800 |
| Romeoville, IL |
630.226.1200 |
|
Perrysburg, OH |
419.873.1900 |
| Carmel, IN |
317.571.0900 |
|
Poca, WV |
304.755.0000 |
|
